Patent application number | Description | Published |
20080209494 | Network architecture for intelligent network elements - Hybrid fiber/coax networks employ the existing cable plant used for cable TV and transmit data signals in a frequency bandwidth above that which is used for cable TV. As this cable plant was deployed in a tree and branch topology, data transmissions may be susceptible to noise, variable transmission loss and frequency dispersion, particularly in the upstream direction. Further, due to the tree and branch topology, homes at the far end of the network experience much greater loss than do the homes that are near to the headend/ONU. The present system, which uses point-to-point data links between intelligent network elements located in the feeder/distribution network to provide reliable, secure, bi-directional broadband access. Digital signals are terminated at the intelligent network elements, switched and regenerated for transmission across additional upstream or downstream data links as needed to connect a home to a headend or router. The intelligent network elements can be co-located with or replace the standard network elements to take advantage of existing network configurations. The standard network elements can be selectively replaced by the intelligent network elements in an incremental approach. A tree-and-branch network architecture is therefore established in which each intelligent network element is assigned a routing ID employed in the point-to-point transmissions while leaving legacy analog signals unimpeded. In this manner, the data links are made over relatively short runs of coax cable, which can provide greater bandwidth than the typical end-to-end feeder/distribution connection between a home and the headend or optical network unit. | 08-28-2008 |
20090083431 | Content rate selection for media servers with proxy-feedback-controlled frame transmission - In a method for dynamically setting a content rate of a multimedia session for a client in a network, a proxy server receives a channel condition feedback message from a network controller and determines whether a receiver report message has been received from the client since a most recent previous channel condition feedback message. The channel condition feedback message includes current channel condition information for the network. The proxy server sends one of an extended feedback report message and a short feedback report message to a media server based on the determining step. The short feedback report message includes at least a maximum transmission rate parameter for the multimedia session. The extended feedback report message includes at least information contained in the receiver report message. The extended feedback report message may, in addition, include the maximum transmission rate parameter for the multimedia session. | 03-26-2009 |
20090089447 | Proxy-driven content rate selection for streaming media servers - Methods for proxy-driven content rate selection for streaming media servers are provided. In one method, one or more maximum transmission rate parameters from a network controller are stored at a proxy server in response to a receiver report message from the client. A target rate for the media session is generated based on the stored maximum transmission rate parameters, and the target rate is transmitted to a media server in a proxy-to-server feedback message. The media server selects the content rate from among a plurality of supported content rates in response to the proxy-to-server feedback message from the proxy server, and streams streaming multimedia frames to the client at the selected content rate. | 04-02-2009 |
20090153326 | Method for locating intruder - Method includes receiving plurality of measured signal strengths, computing estimated intruder signal strength associated with each of plurality of potential intruder locations, and selecting estimated intruder location. Receiving plurality of measured signal strengths includes receiving plurality of measured signal strengths each associated with sensor included in plurality of sensors distributed in monitored area that includes plurality of potential intruder locations. Selecting estimated intruder location includes selecting as estimated intruder location, first potential intruder location associated with estimated intruder signal strength greater than or equal to estimated intruder signal strength associated with another potential intruder location adjacent to first potential intruder location. Computer-readable medium containing code that executes method. | 06-18-2009 |
20100008281 | Broadcast and multicast in single frequency networks using othrogonal space-time codes - In one embodiment, a method of transmitting includes assigning column vectors of a generalized orthogonal space time code matrix to coverage areas of a plurality of base stations such that each coverage area is assigned one column vector. The same data is transmitted from each of the plurality of base stations in the coverage areas such that the data transmitted in each coverage area is transmitted using the column vector assigned to the coverage area. | 01-14-2010 |
20100302984 | Method and apparatus for mobile broadcast and multicast using randomized transmit signal phases in a single frequency network - A base station transmitter for a broadcast/multicast single frequency network may include a base station component configured to randomize a phase of the signal for the base station transmitter to transmit, wherein the base station transmitter is configured to transmit a signal having a frequency common to a frequency of a signal sent by another base station component in the network. A method for improving performance of single frequency networks may include transmitting single frequency signals from base stations with pseudo-random phases including in the signals, data that permits a receiver compatible with the network to synchronously replicate the pseudo-random phases used in the transmission of the single frequency signals. | 12-02-2010 |
20110055403 | Collaboration agent based system architecture to support collaborative multimedia applications over wireless networks - In one embodiment, a method of sending data from a first node participating in a session of a collaborative application via a wireless network to a plurality of second nodes participating in the session of the collaborative application via a wired network includes generating a plurality of data streams corresponding to the plurality of second nodes at the first node, reducing the plurality of data streams to a single stream from among the plurality of data streams, and sending the single data stream to a collaboration agent associated with the first node and connected to the wired network. In another embodiment instances of the collaborative application are run at both the first node and the collaboration agent. In yet another embodiment, an instance of the collaborative application is run only at the collaboration agent which is connected to the first node via a bi-directional windows sharing link. | 03-03-2011 |
20110124289 | Opportunistic Network Interference Cancellation For Wireless Networks - Embodiments are described herein to provide improvements to known network interference cancellation techniques. One general approach involves a receiver attempting to decode ( | 05-26-2011 |
20110225317 | Content rate selection for media servers with proxy-feedback-controlled frame transmission - In a method for dynamically setting a content rate of a multimedia session for a client in a network, a proxy server receives a channel condition feedback message from a network controller and determines whether a receiver report message has been received from the client since a most recent previous channel condition feedback message. The channel condition feedback message includes current channel condition information for the network. The proxy server sends one of an extended feedback report message and a short feedback report message to a media server based on the determining step. The short feedback report message includes at least a maximum transmission rate parameter for the multimedia session. The extended feedback report message includes at least information contained in the receiver report message. The extended feedback report message may, in addition, include the maximum transmission rate parameter for the multimedia session. | 09-15-2011 |
20120071153 | Receive Signal Processing In Wireless Networks - Among the various methods proposed to address interference problems in wireless networks, two promising ones are: Network Multi-Input-Multi-Output (often referred to as Network MIMO) decoding (which employs joint MIMO receiver processing of signals received at multiple antennas); and Multi-Cell Successive Interference Cancellation (MC-SIC). These methods have complementary strengths and limitations when implemented in a practical setting. The approach described herein attempts to combine the strengths of these two methods while working within the constraints imposed by practical implementations to provide a viable hybrid solution. | 03-22-2012 |
20120120808 | REDUCTION OF MESSAGE AND COMPUTATIONAL OVERHEAD IN NETWORKS - Various exemplary embodiments relate to a method and related network node including one or more of the following: receiving, at the node, a network update message; determining whether the network update message should be propagated to other nodes; if the network update message should be propagated to other nodes, forwarding the network update message to at least one other node; and if the network update message should not be propagated to other nodes, refraining from forwarding the network update message to any other node. Various further embodiments relate to a method and related network node including one or more of the following: determining a first time period for the network update message; setting the first time period as a delay time; waiting for the delay time; and after the delay time has elapsed, computing new routing information based on the network update message. | 05-17-2012 |
20120124235 | LOOKAHEAD COMPUTATION OF ROUTING INFORMATION - Various exemplary embodiments relate to a method and related network node including one or more of the following: receiving, at the node, an indication that a current network state has changed to a new network state from an old network state; determining whether the node has access to pre-computed routing information associated with the new network state; if the node has access to pre-computed routing information associated with the new network state, using the pre-computed routing information to route future network traffic; and if the node does not have access to pre-computed routing information associated with the new network state, computing new routing information and using the new routing information to route future network traffic. | 05-17-2012 |
20120124238 | PRIORITIZATION OF ROUTING INFORMATION UPDATES - Various exemplary embodiments relate to a method and related network node including one or more of the following: receiving, at the node, a network state update message; updating a first portion of a first set of routing information based on the network state update message; after updating the first portion of the first set of routing information, beginning an update of a second set of routing information; and after beginning the update of the second set of routing information, updating a second portion of the first set. In various alternative embodiments, the step of updating the first portion includes one or more of the following: determining at least one other node within the network for which routing information should be used to update the second set of routing information; and updating routing information associated with the at least one other node in the first set of routing information. | 05-17-2012 |
20120207037 | PARTITIONING RESOURCES WITH SOFT REUSE IN A WIRELESS NETWORK - Systems and methods are disclosed for reusing resources of a wireless network. Radio communications resources of the wireless network are divided into partitions. A system described herein allows access to resources in the first partition by a first set of users for primary communications on the first partition, and allows access to resources in the first partition by a second set of users for secondary communications on the first partition. The control system also allows access to resources in the second partition by the second set of users for primary communications on the second partition, and allows access to resources in the second partition by the first set of users for secondary communications on the second partition. | 08-16-2012 |
20120289231 | Method And Apparatus For Improved Mobile Communications In Heterogeneous Wireless Networks - Various methods and devices are provided to address the need for improved mobile communications in heterogeneous networks. In one method, an anchor-cell transceiver node communicates with a mobile device via a primary link. The anchor-cell transceiver node conveys information for the mobile device to the mobile device by routing at least a portion of the information to the mobile device via a secondary-cell transceiver node. | 11-15-2012 |
20130121156 | EFFICIENT PROPAGATION OF LINK STATE ADVERTISEMENTS IN DENSELY INTERCONNECTED OSPF NETWORKS - A method for efficient propagation of link state advertisements in densely interconnected OSPF networks is disclosed for reducing the number of duplicate LSAs propagated during a flooding event. The efficient propagation method includes calculating an LSA propagation subgraph which is used by a node which receives an LSA to determine which links to propagate the LSA upon. This allows a significant reduction in the LSAs which traverse the network during a flooding event. The reduction in LSAs is particularly useful for reducing network convergence times associated with flooding events. In addition, a system is disclosed for performing the method in both a centralized and dispersed manner. | 05-16-2013 |
20130188608 | Network Node And Method For Virtual Soft Handoff Operation - Various methods and network nodes (e.g., base stations or base transceiver nodes) are provided to address the need for enhanced uplink performance. In a first method, a virtual soft handoff network node receives ( | 07-25-2013 |
20140029425 | Method And Apparatus For Inter-Carrier Load Balancing - Various methods and devices are provided to address the need for improved inter-carrier load balancing. In one method, network equipment determines ( | 01-30-2014 |
20140029448 | Method And Apparatus For Improved Signal Processing In Wireless Networks - Various methods and devices are provided to address the need for improved cooperation-based signal processing. In a first method, network equipment determines ( | 01-30-2014 |
20140294114 | METHODS AND APPARATUS FOR REDUCING INTERFERENCE EFFECT ON DATA TRANSMITTED OVER A COMMUNICATION CHANNEL - In one example embodiment, a method for reducing an effect of an interference signal on data being transmitted over a communication channel is disclosed. The method includes determining, by a processor, a code vector representing data based on an information vector and an interference vector, the information vector representing the data, the interference vector representing the interference signal. The method further includes generating, by the processor, a transmit vector for transmitting the data based on the code vector and the interference vector. | 10-02-2014 |
20140294126 | METHODS AND APPARATUS FOR REDUCING INTERFERENCE EFFECT ON DATA TRANSMITTED OVER A COMMUNICATION CHANNEL - In one example embodiment, a method for reducing an effect of an interference signal on data being transmitted over a communication channel includes determining, by a processor, a code word based on at least an information vector and an interference vector, the information vector representing the data, the interference vector representing the interference signal. The method further includes determining, by the processor, a code vector based on the determined code word. The method further includes generating, by the processor, a transmit vector based on the code vector and the interference vector. | 10-02-2014 |
20140341078 | REDUCTION OF MESSAGE AND COMPUTATIONAL OVERHEAD IN NETWORKS - Various exemplary embodiments relate to a method and related network node including one or more of the following: receiving, at the node, a network update message; determining whether the network update message should be propagated to other nodes; if the network update message should be propagated to other nodes, forwarding the network update message to at least one other node; and if the network update message should not be propagated to other nodes, refraining from forwarding the network update message to any other node. Various further embodiments relate to a method and related network node including one or more of the following: determining a first time period for the network update message; setting the first time period as a delay time; waiting for the delay time; and after the delay time has elapsed, computing new routing information based on the network update message. | 11-20-2014 |
20150078478 | METHODS AND APPARATUS FOR REDUCING INTERFERENCE EFFECT ON DATA TRANSMITTED OVER A COMMUNICATION CHANNEL - In one example embodiment, a method for reducing an effect of an interference signal on data being transmitted over a communication channel includes determining, by the processor, a code word based on a base information vector and an auxiliary vector, the base information vector including base information bits representing the data to be transmitted over the communication channel, the auxiliary vector corresponding to an interference vector representing the interference signal. The method further includes generating, by the processor, a transmit vector for transmission based on the determined code word and the interference vector. | 03-19-2015 |